网络会议。
| 标题 | 日期 | 开始时间 | 为期 | 寄存器 |
|---|---|---|---|---|
| Reverse NC Import SigmaNEST can import NC files to create geometry from G-code. This webinar will cover the steps required to configure a RevNC file and the process required to import G-Code. We will discuss what types of files are imported and what types of files to avoid. Additionally we will cover best practices for handling the geometry once it is imported and the most practical uses of this feature. | Aug 11, 2021 | 1:00pm EDT | 30 分钟 | 寄存器 |
| Fly Cutting Fly Cutting speeds up the cutting process for parts with repetitive internal patterns. If a Fly Cut is applied to a part with multiple rectangular holes, the entitles will be ordered so that the vertical and horizontal lines will be cut together. This feature supports repetitive internal patterns made up of lines and/or arcs. This webinar will highlight the Fly Cut feature and demonstrate how it works and when it is applicable. | Aug 25, 2021 | 1:00pm EDT | 30 分钟 | 寄存器 |
得到通知
随时关注我们最新的网络研讨会